Upgrade your press brake by leveraging WILA tooling technology

Air bending

Bending sheet metal in different angles using a limited set of tools.

Bottom bending

Bending sheet metal by enclosing the sheet between the punch and the die.

Bending short flanges

WILA's tooling solutions for achieving shorter flange lengths.

Bending with cut-outs near the bend line

Avoid deformations when bending near cut-outs.

Bending galvanized sheet

Bending galvanized sheet metal, aluminium or stainless steel on a press brake.

Box bending

Box bending requires forethinking your choice of press brake and tooling.

Heavy Duty bending

Tool Holders and Tooling for bending thicker or high strength steel.

Hemming

Finish sharp edges and strengthen parts of sheet metal products.

Large radius bending

Creating a bend with a large radius to material thickness ratio.

Mark-free bending

Reduce marking on the surface of the bent material.

Offset bending (Z-bending)

Making two equal and opposite bends in one hit.

An overview of all bending applications and techniques.

All applications

UPGRADE YOUR PRESS BRAKE BY LEVERAGING WILA TOOLING TECHNOLOGY

Purchasing a press brake is a major investment. What if your customers expect higher quality due to a wider range of products, you have change the tools in your press brake more frequently. If your existing press brake cannot accommodate this requirement, it becomes the bottleneck in your production process. How can you overcome this hurdle?

New press brake versus upgrading existing press brake

There are a couple of options if your current situation is causing delivery back logs, missed orders, limited capacity, and lost flexibility. One solution is to purchase a new press brake, which is often supplied with fast, modern tool change systems. However, this usually requires a large capital investment, extra space, and new personnel. A more economical and equally effective solution is to invest in WILA tool changing technology. This investment will enable faster tools changes and increased output with your existing press brake – smaller batch sizes and just in time production. Additionally, a new tool-change system results in increased accuracy.

WILA's advice

WILA makes it possible to upgrade (‘retrofit’) your existing press brake with a New Standard tool change system (both top and bottom versions). This means you can quickly improve productivity without having to purchase a new press brake. The advantage of the WILA New Standard change system is that it is compatible with all press brakes. It is also easy to install and convenient to use.

Would you like to know more?

Feel free to contact our Technical Sales Engineers. They are happy to give you advice on your specific situation.