Clamping bars | Grow your business with WILA

Air bending

Bending sheet metal in different angles using a limited set of tools.

Bottom bending

Bending sheet metal by enclosing the sheet between the punch and the die.

Bending short flanges

WILA's tooling solutions for achieving shorter flange lengths.

Bending with cut-outs near the bend line

Avoid deformations when bending near cut-outs.

Bending galvanized sheet

How to deal with galling while bending galvanized sheet.

Box bending

Box bending requires forethinking your choice of press brake and tooling.

Heavy Duty bending

Tool Holders and Tooling for bending thicker or high strength steel.

Hemming

Finish sharp edges and strengthen parts of sheet metal products.

Large radius bending

Creating a bend with a large radius to material thickness ratio.

Mark-free bending

Reduce marking on the surface of the bent material.

Offset bending (Z-bending)

Making two equal and opposite bends in one hit.

An overview of all bending applications and techniques.

All applications

Easy integration

WILA (A3) clamping bars enable press brake manufacturers to easily integrate hydraulic clamping into the lower beam or table of the press brake. A flexible hose along the entire length of the system is used to transfer oil pressure to the tooling via hardened clamping pins, providing maximum reliability.

A3-G3 clamping bar

The WILA A3-G3 clamping bar has been designed for positioning and clamping of New Standard and American Style bottom tooling. Tang widths from 12.7 to 13 mm and heights from 17 to 20 mm can be clamped. The maximum load is 250 ton/meter for tooling with a symmetric adaption width of 80 mm.