Box bending

Box bending is a common press brake operation, but it does require forethought with respect to your choice of press brake and tooling. WILA has a range of tooling to help you get the most out of your box bending operations.

Factors to consider when setting up for box bending

If you plan to do deep-box bending, it’s important to choose a machine with ample open height. When you are forming a box, the final part is going to be in the press brake at a 45-degree angle when making the third and fourth bends. Therefore, you must plan for the fact that the sides of the boxes have to be able to swing up toward the press brake without hitting it - or any clamping system that may be installed.

Consider the following factors when choosing press brake tooling for deep-box bending:

Tooling Height
Bottom Tool Holder Height
Punch Length
Punch Profiles
Extender Choices
Die Profiles

Box bending products

WILA has a range of tooling profiles and heights for any box bending operation.

200 mm / 8" Tall Punches

When machine open height is not an issue, 200 mm tall New Standard or 8" tall American Style punches offer the most versatility and are best suited for deep-box bending.

View products

Gooseneck Punches

Gooseneck punches offer additional versatility and provide a relief area at the back of the punch for return flanges or anything else that might hit the punch.

View products

Extenders

If you need additional height beyond what your current tooling provides, consider using WILA's extenders. Available in configurations between 100 mm (3.937”) and 200 mm (7.874”).

View products

Frequently Asked Questions

More information about box bending?

If you have any questions about box bending or any other type of sheet metal bending on a press brake, just give us a call. We're here to help!

Find a dealer close to you

WILA dealers have the knowledge and expertise to support your press brake tooling needs. There is always a WILA dealer near you.

Find your local dealer